Deutsch
Französisch
Hanno®-CR 100 EPDM i
The HANNO product world
Product description
Closed-cell, soft-elastic cellular rubber based on EPDM rubber with particularly good resistance to weathering and ozone.
Product properties
- Very good chemical resistance
- Good sealing performance
Application areas
- Automotive
- Aeronautical engineering
- Sanitary technology
- Ventilation and air conditioning technology
Processing
Bonding only on dry, grease-free, clean substrates. Press the surface down well. You can easily adjust the material and cut it to size with a sharp knife.
Cleaning
- No significant soiling from the material is to be expected. In the case of self-adhesive parts, adhesive residues can be removed with a petrol-based cleaning agent if necessary. The safety instructions for the cleaning agent used must be observed.
- The product complies with the following directives or fulfills the required restrictions on use: 1907/2006 (REACH), 2011/65 (RoHs2), 2015/863 (RoHs3), 2019/1021 (POP), 517/2014 (greenhouse gases), 2024/590 (depletion of the ozone layer).
Delivery form
- Sheet goods
- Stripes
- Punched parts (dimensions on request)
- Cuts
- Can be equipped with self-adhesive
Notes
This is a development product for which no complete tests are available. The technical information is based on manufacturer's specifications. Availability is subject to technical testing and feasibility for the desired dimensions. Technical changes are possible in the course of further development work.
This is a development product for which no complete tests are available. The technical information is based on manufacturer's specifications. Availability is subject to technical testing and feasibility for the desired dimensions. Technical changes are possible in the course of further development work.
Download area
| Data sheet "Hanno®-CR 100 EPDM i" | ||
|---|---|---|
| German version | 262 KB | |
| English version | 264 KB | |
| Property | Standard | Value |
|---|---|---|
| Color | - | schwarz |
| Volume weight | DIN EN ISO 845 | 100 ± 20 kg/m³ |
| Compression hardness |
ASTM D-1056 ASTM D-1056 |
45 ± 15 kPa (25 %) 110 ± 25 kPa (50 %) |
| Compression set |
ASTM D-1056 ASTM D-1056 |
≤ 30 % (23 °C/ 22 h /50 % /24 h) ≤ 40 % (40 °C/ 22 h /50 % /24 h) |
| Tensile strength | DIN EN ISO 1798 | ≥ 250 kPa |
| Elongation at break | DIN EN ISO 1798 | ≥ 120 % |
| Linear shrinkage | - | ≤ 5 % (3 h, 80 °C, 6,3 mm) |
| Water absorption | ASTM D-1056 | ≤ 3 % |
| Fire behavior |
FMVSS 302 DIN 75200 ISO 3795 |
< 100 mm/min ab 5 mm |
| Weather resistance | DIN EN ISO 877 | sehr gut |
| Ozone resistance | DIN ISO 1431 | Rissbildstufe 0 |
| Shore hardness | DIN EN ISO 868 | 40 ± 5 |
| Temperature resistance | - | -40 °C bis +100 °C |
| Medium | Rating |
|---|---|
| Säuren | |
| Schwache Säuren | + |
| Alaun wässrig | + |
| Starke Säuren | +/- |
| Salpetersäure | - |
| Schwefelsäure | - |
| Salzsäure | +/- |
| Starke Säuren | +/- |
| Alkohole | |
| Etylalkohol | + |
| Methylalkohol | + |
| Glyzerin | + |
| Kohlenwasserstoffe | |
| Kraftstoffe | - |
| Heizöl | - |
| Testbenzin | - |
| Bremsflüssigkeit | + |
| Fette | |
| Öl | - |
| Fett | - |
| Andere Lösungsmittel | |
| Nitro Verdünnung | - |
| Sonstige Chemikalien | |
| Lösungsmittel | - |
| Waschmittel | + |
| Frostschutzmittel | + |
| Kohlensäure | + |
| Ozon | + |
| Silikonöl und -fett | + |
| Chlorgase | +/- |
| Wasser | + |
| Wasserdampf | + |
| Meerwasser | + |
| Kohlensäure | + |
| Fotochemikalien | + |
| Chlorkalk (wässrig) | + |
| Laugen | |
| Schwache Laugen | + |
| Ammoniak | + |